Backhoe Loader With 2500kg Loading Capacity HTBL820 Product Introduction
A Backhoe Loader Built Around Two Working Functions
Choosing a backhoe loader involves more than comparing engine power or operating weight. Contractors also need to consider how efficiently the front loader and rear excavator can support consecutive tasks, particularly when material removal, trenching and loading must be completed within the same working area.
The HIGHTOP HTBL820 combines these functions in one machine. Its front loader has a rated bucket capacity of 1.2 m³ and a loading capacity of 2,500 kg, providing the working configuration needed for handling soil, sand, gravel and other suitable bulk materials.
At a specified 41° dumping angle, the maximum front bucket dumping height reaches 3,050 ±50 mm, with a dumping distance of 870 ±20 mm. These dimensions are important when assessing truck-loading arrangements, stockpile management and the space required for unloading.
At the rear, the 0.3 m³ excavating bucket provides a maximum digging depth of 3,820 ±20 mm and a maximum digging radius of 5,345 ±20 mm. This combination makes the HTBL820 relevant to contractors looking for a backhoe loader for trench digging, foundation preparation and general earthmoving.
Rear Excavation with a Hydraulic Side-Shift Carriage
A distinguishing feature shown in the HTBL820 specifications is its hydraulic side-shift carriage.
The rear excavating system provides a maximum digging height of 5,470 ±20 mm, while the maximum listed loading height is 3,740 ±20 mm. The specified digging force is 5,100 kgf, and the lifting force at maximum digging radius is 1,220 kgf.
These figures help buyers evaluate the working range of the rear excavator rather than relying on digging depth alone.
The hydraulic side-shift arrangement is particularly relevant when planning excavation positions along working areas where machine placement must be considered carefully. Actual operating limits should always be checked against the working diagram, ground conditions and the selected attachment.
Engine and Transmission Configuration
The main engine specification lists a water-cooled Cummins engine rated at 93 kW at 2,200 rpm, with a displacement of 4.8 L. However, the standard configuration section separately identifies a Yuchai engine.
For this reason, the final engine manufacturer and model should be confirmed with HIGHTOP before ordering.
The transmission specification includes a model 315 hydraulic torque converter, a mechanically operated hydraulic synchronized-shift gearbox and WZL100 driving axles.
The machine provides four forward and four reverse gears, with specified travel speeds ranging from 1–5 km/h in first gear to 4–32 km/h in fourth gear.
This transmission arrangement gives buyers a clear basis for assessing the machine's travel-speed range when comparing construction backhoe loaders.
Hydraulic System and Attachment Compatibility
The HTBL820 hydraulic system has a listed working pump displacement of 63 mL/rev and a working pump pressure of 20 MPa.
A hydraulic hammer circuit is identified as reserved in the standard configuration. The product information also displays multiple working attachments, allowing customers to discuss configurations for different loading and excavation requirements.
For the hydraulic hammer attachment, the supplied reference data includes a rod diameter of 68–70 mm, operating pressure of 11–14 MPa, impact frequency of 500–900 and an oil-flow range of 25–45 L/min.
Attachment compatibility and hydraulic requirements must be confirmed against the final machine configuration.
For buyers considering other types of equipment alongside a backhoe loader, explore the HIGHTOP Product Center to compare available construction machinery and product categories.
Hightop HTBL820 Backhoe Loader Parameters
Overall Dimensions
| Parameter | Specification |
|---|---|
| Model | HTBL820 |
| Product Type | Backhoe Loader |
| Operating Weight | 10,050 kg |
| Overall Length, Bucket at Ground | 6,450 ±80 mm |
| Overall Width | 2,500 ±20 mm |
| Bucket Width | 2,500 mm |
| Overall Height, Cabin Top | 3,120 ±10 mm |
| Overall Height, Digging Boom Top | 3,940 ±20 mm |
| Wheelbase | 2,335 ±10 mm |
| Wheel Tread | 2,139 ±10 mm |
Front Loader Performance
| Parameter | Specification |
|---|---|
| Rated Load | 2,500 kg |
| Rated Bucket Capacity | 1.2 m³ |
| Maximum Dumping Height, 41° Dumping Angle | 3,050 ±50 mm |
| Dumping Distance | 870 ±20 mm |
| Turning Radius, Outside Tyres | 5,750 ±50 mm |
Rear Excavator Performance
| Parameter | Specification |
|---|---|
| Rear Bucket Capacity | 0.3 m³ |
| Maximum Digging Depth | 3,820 ±20 mm |
| Maximum Digging Radius | 5,345 ±20 mm |
| Maximum Listed Loading Height | 3,740 ±20 mm |
| Maximum Digging Force | 5,100 kgf (as listed) |
| Maximum Digging Height | 5,470 ±20 mm |
| Lifting Force at Maximum Digging Radius | 1,220 kgf |
Engine
| Parameter | Specification |
|---|---|
| Engine Manufacturer, Main Parameter Table | Cummins |
| Engine Manufacturer, Standard Configuration Table | Yuchai |
| Cooling Type | Water Cooling |
| Rated Power | 93 kW |
| Rated Speed | 2,200 rpm |
| Listed Displacement | 4.8 L |
| Maximum Torque | 400 (unit to be confirmed) |
Hydraulic System
| Parameter | Specification |
|---|---|
| Working Pump Displacement | 63 mL/rev |
| Working Pump Pressure | 20 MPa |
| Diverter Model | BZZ5-250 |
| Hydraulic Pump, Standard Configuration | Jinan Quancheng |
Transmission
| Parameter | Specification |
|---|---|
| Hydraulic Torque Converter Model | 315 |
| Cooling Method | Pressurized Oil Circulation |
| Gearbox | Mechanically Operated Hydraulic Synchronized Shift |
| Driving Axle Model | WZL100 |
| Gears | 4 Forward / 4 Reverse |
| Forward Speed, 1st Gear | 1–5 km/h |
| Forward Speed, 2nd Gear | 2–10 km/h |
| Forward Speed, 3rd Gear | 3–18 km/h |
| Forward Speed, 4th Gear | 4–32 km/h |
| Reverse Speed, 1st Gear | 1–5 km/h |
| Reverse Speed, 2nd Gear | 2–10 km/h |
| Reverse Speed, 3rd Gear | 3–18 km/h |
| Reverse Speed, 4th Gear | 4–32 km/h |
| Tyre Specification | 16.9-28 |
Hydraulic Hammer Attachment Reference
| Parameter | Specification |
|---|---|
| Rod Diameter | 68–70 mm |
| Working Pressure | 11–14 MPa |
| Impact Frequency | 500–900 (unit not specified) |
| Required Flow Range | 25–45 L/min |
| Listed Kinetic Energy | 49 KN (unit/meaning to be confirmed) |
Fluid Capacities
| Parameter | Specification |
|---|---|
| Hydraulic Oil Tank | 125 L |
| Fuel Tank | 125 L |
Listed Standard Configuration
| Component | Specification |
|---|---|
| Engine | Yuchai |
| Cockpit | Anti-Roll Structure |
| Air Conditioner | Mechanical Control |
| Hydraulic Pump | Jinan Quancheng |
| Steering Gear and Priority Valve | Jining Eaton |
| Hydraulic Hammer Circuit | Reserved |
| Carriage | Hydraulic Side Shift |
| Steering and Tyres | Four-Wheel Steering, 16.9-28 |
Backhoe Loader HTBL820 Images
HIGH PERFORMANCE BACKHOE LOADER
EXTENDABLE
EXCAVATOR ARM
Greater Reach,Deeper Digging,More Possibilities
PRODUCT DETAILS
01 One machine,multiple uses:Compatible with a wide range of attachments. Choose different attachments to suit the job, making this a versatile and powerful machine
02 Agile handling and safe driving:The intelligent hydraulic system and spacious, ergonomic cab ensure safe operation in all weather conditions
03 Rear excavator arm is telescopic:The excavator utilises a slide rail system,offering the advantage of folding for side excavation and allowing free movement
04 Specialised tyres with excellent airtightness:Thick, non-slip tyres designed specifically for construction vehicles
RELIABLE POWER
BUILDS A STRONGER TOMORROW
Cummins 4BT3.9 Engine
Powering Your Heavy-Duty Equipment
GREATERACCESSIBILITY,GREATEREFFICIENCY
MAX LOADING HEIGHT 3740±20 mm
High lifting capability with extendable stabilizer legs,for a wider range of working conditions.
4－Wheel Steering System
Turning Radius:5750 ± 50mm
This backhoe loader is designed for narrow job sites,agricultural fields, and municipal roads.
It can be paired with various attachments
Backhoe Loader With 2500kg Loading Capacity HTBL820 Application Scenarios
Construction Site Preparation
The HTBL820 can support projects involving both material loading and excavation.
Its front loader is suitable for handling appropriate loose construction materials, while the rear excavator provides an additional working function for localized digging and site preparation.
Trench Excavation and Drainage Work
With a maximum digging depth of 3,820 ±20 mm and a digging radius of 5,345 ±20 mm, the HTBL820 provides relevant working dimensions for trench excavation planning.
Contractors should compare these specifications with the required trench profile, ground conditions and safe working clearances.
Agricultural and Rural Construction
The combination of front loading and rear excavation can be useful for suitable farm-access work, material transfer, drainage preparation and rural construction projects.
The required bucket and attachment configuration should be selected according to the intended material and working environment.
Loading and Material Transportation
The 1.2 m³ front bucket, 2,500 kg rated load and 3,050 ±50 mm maximum dumping height provide a practical technical basis for assessing loading applications.
The density of the material, bucket fill level and transport vehicle dimensions must be considered when planning actual operations.
Attachment-Based Work
The supplied product information displays multiple attachment options and lists a reserved hydraulic hammer circuit.
Customers can discuss available attachments with HIGHTOP to confirm compatibility, hydraulic requirements and the configuration needed for their projects.
HIGHTOP Service and Technical Support
Project-Based Equipment Selection
HIGHTOP assists customers in comparing the HTBL820's loading capacity, excavation range, dimensions and available configurations with their intended applications.
Configuration Confirmation
Before ordering, customers can confirm the engine manufacturer, transmission, steering configuration, hydraulic system and compatible attachments.
Product Documentation
Available specifications and technical materials can be provided to support equipment comparison, procurement and operating preparation.
Maintenance and Spare Parts Assistance
HIGHTOP provides assistance with maintenance-related inquiries, technical information and spare parts identification according to the agreed service terms.
International Purchasing Support
Overseas buyers can contact HIGHTOP to discuss machine configuration, destination requirements, transportation arrangements, documentation and delivery conditions.
Backhoe Loader HTBL820 Frequently Asked Questions
1. What is the operating weight of the HTBL820?
The HTBL820 has a specified operating weight of 10,050 kg.
2. What is the maximum digging depth?
The rear excavator provides a maximum digging depth of 3,820 ±20 mm.
3. What is the front loader bucket capacity?
The front bucket has a rated capacity of 1.2 m³ and a rated loading capacity of 2,500 kg.
4. What is the rear excavator bucket capacity?
The rear excavating bucket has a rated capacity of 0.3 m³.
5. What engine does the HTBL820 use?
The main specification lists a Cummins engine, while the standard configuration section identifies Yuchai. The final engine manufacturer and model should be confirmed before purchase.
6. Does the HTBL820 feature four-wheel steering?
Yes. Four-wheel steering is identified in the supplied standard configuration, with a specified outside-tyre turning radius of 5,750 ±50 mm.
7. What is the maximum front bucket dumping height?
The specified maximum dumping height is 3,050 ±50 mm at a 41° dumping angle.
8. Does the HTBL820 support a hydraulic hammer?
The standard configuration lists a reserved hydraulic hammer circuit. Attachment compatibility and the final hydraulic configuration should be confirmed with HIGHTOP.
9. What is the maximum travel speed?
The listed fourth-gear speed reaches 32 km/h in both forward and reverse travel.
10. How can I obtain a quotation?
Contact HIGHTOP with your intended application, destination country, preferred engine configuration and attachment requirements. Our team can assist with specification confirmation and quotation inquiries.
